[TR] TR6 Rear Fender Mounting Kit

[Darrell Walker]

If the TR6 is like the TR4A, then they go under the bolt heads (after the metal washer).  I think the idea is to seal out the water from the inside the wheel well.

-Darrell

> On Jan 15, 2016, at 4:20 PM, D&BLambert <dblambert at cox.net> wrote:
> 
> I'm (finally) in a position to remount the rear fenders on my'71 TR6
> project.  I purchased the mounting kits from TRF and they look good and very
> complete.  The kits come with about 20 fiber/cardboard "sealing washers"
> about 1/16" thick.  I don't remember taking any off when I dissembled the
> car about 5 years ago.  Where do the sealing washers go?  Between the
> fenders and the body shell seems to be the logical place, but like I say,
> there weren't any that came off.
> Thanks, Dennis
> <RFK134.JPG>
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/darrellw360@mac.com