[TR] Tach needle (TR3)

[Andrew Uprichard]

Well, I have three TR3s and the other two are much more stable than this one.

 

Andrew

 

From: Joao Simoes [mailto:jmbs46 at comcast.net] 
Sent: Sunday, May 03, 2015 6:47 PM
To: Andrew Uprichard
Cc: <triumphs at autox.team.net>
Subject: Re: [TR] Tach needle (TR3)

 

Every British car cable driven tach I've seen does this.

Take care,

 

Joao


On May 3, 2015, at 5:00 PM, Andrew Uprichard <auprichard at uprichard.net> wrote:

I have just put 100 miles on my newly-restored ’57 small-mouth and am working through the usual “teething” problems:  leaks, oil pressure adjustment, electrical glitches, etc.  One thing I cannot work out is that the needle on the tach swings about quite a bit:  it’s ok at steady rpm, but gear changes cause marked fluctuations.

 

I had the gauge rebuilt by Nisonger and I have a new cable.  Any thoughts why this should be so?

Andrew


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/jmbs46@comcast.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150503/2f3d6fc2/attachment.html>