[TR] Tach needle (TR3)
Joao Simoes
jmbs46 at comcast.net
Sun May 3 16:46:50 MDT 2015
Every British car cable driven tach I've seen does this.
Take care,
Joao
> On May 3, 2015, at 5:00 PM, Andrew Uprichard <auprichard at uprichard.net> wrote:
>
> I have just put 100 miles on my newly-restored ’57 small-mouth and am working through the usual “teething” problems: leaks, oil pressure adjustment, electrical glitches, etc. One thing I cannot work out is that the needle on the tach swings about quite a bit: it’s ok at steady rpm, but gear changes cause marked fluctuations.
>
> I had the gauge rebuilt by Nisonger and I have a new cable. Any thoughts why this should be so?
>
> Andrew
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/jmbs46@comcast.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150503/effa1fc0/attachment.html>
More information about the Triumphs
mailing list