[TR] Temp. guages - further question

[Geo Hahn]

A technique for effecting a repair using the cap tube & bulb from a new
aftermarket gauge is described here:

http://www.ply33.com/Repair/tempgauge

I have never done this but wouldn't hesitate to try if the need ever arose
(not a lot to lose and much to gain).

Geo

On Mon, Feb 23, 2015 at 9:17 PM, Greg Gelhar <greg at gelhar.com> wrote:

> I have repaired a few original Smith Jaeger temperature gauges by using
> new capillary tubes and sensing bulbs taken from the Sun gauges. I use the
> new fitting nut from the Sun gauges without any problem.
>
> Greg G.
> Osseo, MN
>
> T-Mobile. America’s First Nationwide 4G Network
>
> Angelo Graham <agraham at execulink.com> wrote:
>
> >Hello List:
> >Have been following the latest discussion on the temperature gauges with
> >capillary tubes and the substitute "aftermarket"  (SunPro) gauges that
> >will fit. Just have a question about the fitting at the thermostat
> >housing end. Will the fitting around the capillary bulb fit into the
> >thermostat housing; are the threads compatible?
> >Wondering about this one.
> >Really waiting for Spring -25C tonight.
> >Angelo Graham
> >
> >
> >** triumphs at autox.team.net **
> >
> >Donate: http://www.team.net/donate.html
> >Archive: http://www.team.net/archive
> >Forums: http://www.team.net/forums
> >Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/greg@gelhar.com
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150224/98a45e5b/attachment.html>