[TR] Door Window Replacement

[Roger Elliott]

Hi Johnnie,

I don't think anyone has it made to spec.  When I have done doors (never 
a 4A), I just used plastic, like I would use for a drop cloth and cut it 
myself,  It doesn't need to be too precise since it is hidden by the 
door panels.

Roger Elliott
On 02/25/2014 08:31 AM, John & Pat Donnelly wrote:
> As I posted before I'm in the middle of R&R-ing the doors on my TR4A. New
> winders are in, door latch mechanism  cleaned and tightened, new window
> channels in, new window installed and Fatmat installed. But, when I took it
> apart there was plastic sheeting throughout, heavier than visqueen, but
> still flexible. Most of the sheeting was clamped to the inside top lip using
> small clips and appeared to be "guarding" the inside of the door, although
> there was a piece attached to the window channel.  It deteriorated and tore
> apart as I disassembled the door and need to replace it.
>
> Does anybody know what this is? Is there an alternate? Does any of the big 3
> carry the sheets premade?
>
> Johnnie
>
> '67 TR4A