[TR] Storing sheet metal (fenders)

[Joe Curry]

And if they are bare metal, priming with regular primer won't do much good.
Use a good urethane primer which resists moisture.

Joe

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of George Richardson
Sent: Saturday, January 05, 2013 12:23 PM
To: triumphs at autox.team.net
Subject: Re: [TR] Storing sheet metal (fenders)

I've had a set of new fenders for my TR6 for more than 10 years now. 
I've had them outside for a year, inside for most of that time. Cover 
them so they stay dry and dust free, and you should have no problems 
unless they're bare metal.

George Richardson
Key Men - Keys for Classics
www.key-men.com

On 1/5/2013 12:15 PM, Malcolm wrote:
> Hi List,
>
> I've been lurking for a while now - some of you may remember me from the
> late '90s.  Life has interrupted but I still have my TR4.
>
> I now also have the opportunity to buy a pair of rear fenders.  However,
> they would have to be stored in my (unheated) workshop or the attic of our
> house, for a few months to a year, while I figure out how to get the TR4
> into the workshop for a proper restoration.
>
> What do people recommend for treating the sheet metal for storage?  Oil,
> grease, waxed paper, really big ziploc bags?
>
> Thanks in advance!
>
> -Malcolm
> '62 TR4 (CT10339L)
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/gpr@key-men.com

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/spitlist@cox.net