[TR] Intake Manifold Bolt Issue

[Andrew Uprichard]

Is this a case where you can put a nut on the bolt, weld it in place and
then remove by turning the nut?  Worked in the past with me for a head stud
that was locked in place.

Andrew Uprichard

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Larry Brouder
Sent: Tuesday, June 05, 2012 6:53 AM
To: triumphs at autox.team.net
Subject: [TR] Intake Manifold Bolt Issue

Hi All,  The center bolt in the intake manifold on top isn't moving-it
appears
to be stripped inside but the stud won't come out-any tricks? I can
re-thread
and repair, but it's being a bit ornery in coming out.
 
Thanks, 
Larry
 
1969
GT6+

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net