[TR] Intake Manifold Bolt Issue

[Dave]

I had to use vice grips recently on a manifold bolt (after using a smoky 
wrench)

-----Original Message----- 
From: Andrew Uprichard
Sent: Tuesday, June 05, 2012 4:56 PM
To: 'Larry Brouder' ; triumphs at autox.team.net
Subject: Re: [TR] Intake Manifold Bolt Issue

Is this a case where you can put a nut on the bolt, weld it in place and
then remove by turning the nut?  Worked in the past with me for a head stud
that was locked in place.