[TR] 3 brake pedal springs
Randall
TR3driver at ca.rr.com
Sat Oct 8 19:31:22 MDT 2011
> For some reason, the pushrod refuses to plunge within the new
> master cylinder.
Could it be stopping because the brakes are applied?
> However, with nothing
> attached to it, the pedal still doesn't spring up toward the driver.
It should take practically nothing to move the pedal with it disconnected
... sounds to me as though the pivot pin inside the pedal assembly has
gotten rusty in spite of the "adequate lube". I would pull it apart
(again).
-- Randall
More information about the Triumphs
mailing list