[TR] 3 brake pedal springs

[Paul Dorsey]

Thanks to Bill and Randall for pointing me in the right direction.
Paul


----- Original Message ----- 
From: "Randall" <TR3driver at ca.rr.com>
To: "'Paul Dorsey'" <dorpaul at bellsouth.net>; <triumphs at autox.team.net>
Sent: Saturday, October 08, 2011 9:31 PM
Subject: RE: [TR] 3 brake pedal springs


>> For some reason, the pushrod refuses to plunge within the new 
>> master cylinder.
> 
> Could it be stopping because the brakes are applied?
> 
>> However, with nothing
>> attached to it, the pedal still doesn't spring up toward the driver.
> 
> It should take practically nothing to move the pedal with it disconnected
> ... sounds to me as though the pivot pin inside the pedal assembly has
> gotten rusty in spite of the "adequate lube".  I would pull it apart
> (again).
> 
> -- Randall