[TR] TR4 interior and seat belts

[Gary O'Hagan]

On Jan 22, 2011, at 2:52 PM, Ben Zwissler wrote:
Thanks to all who replied.

> , but you should have some matching, loose vinyl to cover the B-pillar
Yes I have loose vinyl and can cover the exposed areas.
> and a small, triangular piece of vinyl covered cardboard
My kit didn't come with these.  I can make them, just don't know the exact size so it may not come out just right.
>      
> For the seat belts there should be eye-bolts that screw into welded reinforcement plats with welded-on nuts behind the B-pillar and on the tunnel over the driveshaft.  The seat belts clip to the eye-bolts.

I don't have eyebolts, but shouldn't have trouble finding some.  Also don't have welded reinforcements.
Gary