[TR] tr-3 dash cover..

[wbeech at flash.net]

I'm sure a 10 minute soak in some fresh lacquer thinner would do the job as
well.

Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"



-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Carl TR
Sent: Sunday, September 12, 2010 9:11 PM
To: Gary Nafziger; triumphs at autox.team.net
Subject: Re: [TR] tr-3 dash cover..

I'd be careful with that approach.  any imperfections left on/in the metal
may be obvious when the vinyl is glued/stretched.

industrial strength vinyl remover should get it off.  Just let it soak a
bit.

Carl


----- Original Message -----
From: "Gary Nafziger" <nafzigerg at yahoo.com>
To: <triumphs at autox.team.net>
Sent: Sunday, September 12, 2010 10:51 PM
Subject: [TR] tr-3 dash cover..


> covering my 3 dash is still too far off and i've not even looked at it. 
> Too far
> out........ so i'm in no place to give advice........lol............but 
> i'm
> wondering how using an angle grinder with a knotty wire brush would work 
> taking
> off old adhesive/vynl?  Pretty aggressive I know but i've seen what this 
> can do
> to old paint/rust............just wondering.
>
>
> gary n.
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net

_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net