[TR] tr-3 dash cover..

[Carl TR]

I'd be careful with that approach.  any imperfections left on/in the metal 
may be obvious when the vinyl is glued/stretched.

industrial strength vinyl remover should get it off.  Just let it soak a 
bit.

Carl


----- Original Message ----- 
From: "Gary Nafziger" <nafzigerg at yahoo.com>
To: <triumphs at autox.team.net>
Sent: Sunday, September 12, 2010 10:51 PM
Subject: [TR] tr-3 dash cover..


> covering my 3 dash is still too far off and i've not even looked at it. 
> Too far
> out........ so i'm in no place to give advice........lol............but 
> i'm
> wondering how using an angle grinder with a knotty wire brush would work 
> taking
> off old adhesive/vynl?  Pretty aggressive I know but i've seen what this 
> can do
> to old paint/rust............just wondering.
>
>
> gary n.
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net