[TR] tr-3 dash cover..

[Frank Fisher]

take it and have it media blasted.
should cost you about 30.00
frank
________________________________
From: Carl TR <cfmtr3a at verizon.net>
To: Gary
Nafziger <nafzigerg at yahoo.com>; triumphs at autox.team.net
Sent: Sun, September
12, 2010 8:11:15 PM
Subject: Re: [TR] tr-3 dash cover..

I'd be careful with
that approach.  any imperfections left on/in the metal may 
be obvious when
the vinyl is glued/stretched.

industrial strength vinyl remover should get it
off.  Just let it soak a bit.

Carl


----- Original Message ----- From: "Gary
Nafziger" <nafzigerg at yahoo.com>
To: <triumphs at autox.team.net>
Sent: Sunday,
September 12, 2010 10:51 PM
Subject: [TR] tr-3 dash cover..


> covering my 3
dash is still too far off and i've not even looked at it. Too 
far
>
out........ so i'm in no place to give advice........lol............but i'm
>
wondering how using an angle grinder with a knotty wire brush would work
taking
> off old adhesive/vynl?  Pretty aggressive I know but i've seen what
this can 
do
> to old paint/rust............just wondering.
> 
> 
> gary n.
>
> _______________________________________________
> Triumphs at autox.team.net
>
Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com