[TR] TR3 Lower Windscreen Seal

[Randall]

> I can only get the seal to 
> slide in about 3" before it binds up. 

I've never had much luck sliding that seal into place, so I just lay one
side in the groove and then use a blunted screwdriver to force the other
side into place.  Seems best to do it with the stanchions off, and the frame
laying on a firm flat surface, padded with towels or whatever.

Besides, you can drive to work without it.  You'll get wet if it rains, but
that's true with or without the seal <G>

Randall