[TR] tr-3 elbow/cockpit capping pieces

[Bob Annand]

I drove my TR3 for years without the 3 rear cappings. I finally located a 
set, and straightened, covered and fitted them. Imagine my dismay when I 
discovered that my tonneau, hood set stick cover and hood would no longer 
fit.

Bob
TS57799L

----- Original Message ----- 
From: <wbeech at flash.net>
To: "'Gary Nafziger'" <nafzigerg at yahoo.com>; <triumphs at autox.team.net>
Sent: Sunday, July 25, 2010 11:22 AM
Subject: Re: [TR] tr-3 elbow/cockpit capping pieces


> Gary,
> You will need both the metal capping and the covering kits.  The only 
> place
> there is padding is on the doors, that you already have, the rest of the
> pieces are just put on directly to the metal with contact cement.
>
> BTW, if you are going to do this yourself be sure to take you time a 
> dry-fit
> everything first.