[TR] TR3 Engine Breather Pipe

[Carl TR]

that is what I was hoping.  Will tackle it tomorrow.

Thanks

----- Original Message ----- 
From: "Geo Hahn" <ahwahneetr at gmail.com>
To: <cfmtr3a at verizon.net>
Cc: <triumphs at autox.team.net>
Sent: Sunday, August 22, 2010 9:31 PM
Subject: Re: [TR] TR3 Engine Breather Pipe


> On 8/22/10, Carl TR <cfmtr3a at verizon.net> wrote:
>> ...forgot to pull out the plug that is in the hole.  Is there any secret 
>> to getting
>> it out?  It is a pressed in...
>
> It is just pressed in and rather snug, and not an easy spot to get at.
>
> I managed to weaken the face of the plug with a dremel, then drive a
> stubby screwdriver thru the metal.  Once that was in I was able to
> twist the cap and finally pry it out.  They'll never use that cap
> again.
>
> Geo