[TR] Help trying to align my bonnet on TR6

Bob Danielson 75tr6 at tr6.danielsonfamily.org
Sat Sep 19 18:38:23 MDT 2009


Any panel alignment is a PITA but there may be some tips here to help 
you out..........it's mostly trial and error.

http://tr6.danielsonfamily.org/HoodInstall.htm


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org

Wayne wrote:
> Anyone have a trick for aligning the bonnet on a TR6?
> Every time I try another position the bonnet seems to not be lined up where it
> should be when I close it.
> It seems to be always hugging the drivers side, almost hits the fender when
> closing, and when almost closed
> the gap is large on the passenger side along the top of the fender and tight
> on the drivers side.
> Is it possible that I may need to bend the hinge brackets?
> I only removed the bolts on the bonnet, I did not move the hinge bolts to the
> body at all when I removed the hood
> 8 years ago for the engine rebuild.
> 
> 
> Wayne
> 73 TR6
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
> 
> 
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
> 
> 
> http://www.team.net/archive


More information about the Triumphs mailing list