[TR] boot/bonett hinges
Frank Fisher
yellowtr3 at yahoo.com
Wed Nov 18 17:47:55 MST 2009
Gary
my boot hinges have a different hole center than my bonnet
Frank
58 TR3
TS41366L
________________________________
From: Gary Nafziger
<nafzigerg at yahoo.com>
To: triumphs at autox.team.net
Sent: Wed, November 18, 2009
4:06:20 PM
Subject: [TR] boot/bonett hinges
Taking apart my tr-3 resulted in
my throwing the 4 hinges together in a box. Now i'm having trouble telling
them apart. I noticed in the Moss catalogue that the boot and bonett hinges
have differant part numbers so i assume they're differant fitting. I find
they look the same as far as bold holes spacing. I did find that inside one
hinge had the numbers 4344 LH and 4348 RH. Another hinge had numbers 4346 RH
and 4350 LH with the remaining two hinges having no numbers anywhere. I can't
figure out why a hinge would have two numbers and another hinge have nothing
at all.
I'm not sure how to tell the hinges apart, maybe just trial and
error. If anyone has experience or information it would help.
thanks
gary
n.
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
This list supported in part by the Vintage
Triumph Register
http://www.vtr.org
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
More information about the Triumphs
mailing list