[TR] Adding oil pressure gauge

[John Macartney]

Ted Schumacher and his wife have just spent two days of their vacation with us in the UK - and while 
they were here, I saw that braided line. Usual NFI caveat and I'm not on commission - but the line 
sure looks ideal for the purpose. I'd buy one from Ted if I needed it.

Jonmac

----- Original Message ----- 
From: "John Mitchell" <jmitch at snet.net>
To: "sujit roy" <triumphstag at gmail.com>
Cc: "Triumphs" <triumphs at autox.team.net>
Sent: Wednesday, June 10, 2009 5:16 PM
Subject: Re: [TR] Adding oil pressure gauge


> Try Ted Schumacher at TSI.  I bought a braided stainless oil pressure line from him for my TR6. 
> John Mitchell
>
> sujit roy wrote:
>> I'm adding an oil pressure gauge to the Stag. I'd like to know what material
>> of flex pipe I should use as the pipe will run very close to the exhaust
>> manifold. The oil pressure on the stag does not run much above 50-60 PSI
>> Someone mentioned to use a steel tube to a point away from the manifold and
>> then branch off using flex pipe.
>> Any suggestions welcome.
>>
>>
>> Thanks, Sujit
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as standardtriumph at btinternet.com
>
> http://www.team.net/archive