[TR] Adding oil pressure gauge

[John Mitchell]

Try Ted Schumacher at TSI.  I bought a braided stainless oil pressure 
line from him for my TR6.  John Mitchell

sujit roy wrote:
> I'm adding an oil pressure gauge to the Stag. I'd like to know what material
> of flex pipe I should use as the pipe will run very close to the exhaust
> manifold. The oil pressure on the stag does not run much above 50-60 PSI
> Someone mentioned to use a steel tube to a point away from the manifold and
> then branch off using flex pipe.
> Any suggestions welcome.
>
>
> Thanks, Sujit