[TR] transmission rebuild

[Randall]

> Matter 
> of fact if i remember right the gears as well as thrust 
> washers in the lower area of the transmission all lay in 
> there loose.......as you shove the shaft through the casing 
> adn through the gears...

Yup, dat's right.

> .......this is rather blind because 
> you already have to have the upper shaft and gears installed 
> which covers up the lower gears.  unbelievably it did work.

Even more entertaining on the Stag box, which has two washers and a bearing
at each end, instead of just one washer.  But it's still not too hard.

> sure i'd do it again. lol

If you do, be sure to check out the excellent tech articles available at
http://www.vtr.org/maintain-index.shtml
and
http://www.buckeyetriumphs.org/technical/technical.htm

While a factory book or Haynes is still a good thing to have, the above
(free) articles are much clearer IMO.

Randall