[TR] FYI on oil pump problem

[Michael Marr]

To quote Francis Urquhart ("House of Cards"): "You might think that, but I 
couldn't possibly say that..."

Mike

>> Knurling a shaft that is a loose press fit or making random  center punch
>> marks on the OD of a bushing that is a little loose are old machinists
>> tricks that would get you fired in the shop that I worked in back in the
>> 60s.  Now, it appears, it is a valid production technique!  I will make 
>> my
>> own assumption as to the source of the pumps Randall refers to...
>>
> We're talking about the same folks who laced baby formula with melamine
>
> Dave
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as mmarr at notwires.com
>
> http://www.team.net/archive