[TR] FYI on oil pump problem

[Dave1massey at cs.com]

In a message dated 9/18/2008 10:05:46 AM Central Daylight Time, 
mmarr at notwires.com writes: 
> Knurling a shaft that is a loose press fit or making random  center punch 
> marks on the OD of a bushing that is a little loose are old machinists 
> tricks that would get you fired in the shop that I worked in back in the 
> 60s.  Now, it appears, it is a valid production technique!  I will make my 
> own assumption as to the source of the pumps Randall refers to...
> 
We're talking about the same folks who laced baby formula with melamine

Dave