[TR] Anti run-on valve

[Tom Note]

Thanks for the clear explanation Dave. I wasn't sure what to look for.

Tom




----- Original Message ----- 
From: <Dave1massey at cs.com>
To: <triumphs at autox.team.net>
Sent: Sunday, March 16, 2008 9:42 PM
Subject: Re: [TR] Anti run-on valve


> Sure.  Apply 12 volts to the two terminals and the plunger should move.
>
> The bottom off the valve (opposite the terminals) is open to the bottom of
> the plunger.  You can push it in with your finger to see it move. 
> position the
> valve where you can see it and apply 12 volts and you should see it should
> pull in.
>
> Dave
> _______________________________________________