[TR] Body Solder

[Bob Labuz]

On Monday 03 March 2008 06:58 am, DLylis at aol.com wrote:
> A PO of my 3A brazed a few small mild steel patches that are  acceptable. 
> I need to do some metal fill at the edge of one of the patches  and am
> hesitant to braze as I am afraid that the heat will cause the existing 
> braze to let go.  Does anyone know if tin/copper lead free solder on a 
> roll (plumbing) with no flux core is the same that is sold as lead free
> body  solder?  I don't need much so I am not too excited about buying body 
> solder.
> Body filller is not an acceptable soluton as there are pin holes that  need
> to be filled and I do not like to fill holes with filler.
>
> David  Lylis
> 69 TR6 CC26160L
> 60 TR3A TS74461LO
>
David,

Here is a link to eastwood's product.

http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=14770&itemType=PRODUCT&iProductID=14770

I went with the lead/tin product with great results. This wasnt available a 
few years ago.

THey have a whole line of body solder stuff.

Bob