[TR] More TR3 things bugging me

[TR250Driver at aol.com]

In a message dated 7/26/2008 1:13:19 P.M. Eastern Daylight Time,  
wbeech at flash.net writes:

I was  just thinking about those
bolt head too as well as the heater tube that  runs along side the engine and
the metal band, dust cover, around the back  of the starter.  I left them
both natural, unfinished, I hope this is  correct.



I would say the tube should be black if you are referring to the one that  
goes to the water pump.  BTW, Yikes they painted my water pump grease jerk  
black!  I would be good with the starter as long as the finish on the  casing is 
matte black.
 
The TRA Judging manual is saying that bonnet release was installed prior to  
painting so the hardware should be body color.  But natural or body color  is 
accepted on the spring, spring-thimble cup & cable which means  they really 
have on clue.  
 
Darrell



**************Get fantasy football with free live scoring. Sign up for 
FanHouse Fantasy Football today.      
(http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020)