[TR] what a blast!

[John Macartney]

Relay it, for heaven's sake!!!!!!!

Jonmac

----- Original Message ----- 
From: <DLylis at aol.com>
To: <triumphs at autox.team.net>
Sent: Thursday, July 03, 2008 11:43 PM
Subject: [TR] what a blast!


> After seeing the pics of the 3A that was crushed by a truck in Toronto, I  
> have decided that I am installing super loud horns on my 3A.  I have  selected a 
> Wolo horn with an integrated compressor that really BLASTS.  It  is fairly 
> discreet and can install out of the way.  The wiring recommended  for this thing 
> is 16 gauge so I don't think I have problem there, however, there  are 
> instructions to wire it one way if you are using the factory horn button and  to 
> wire it another way with a relay if you are installing a secondary  button.  That 
> tells me that they are assuming that the factory installed a  relay for the 
> factory horns  (?).  Unless I am missing something big,  that is not the case 
> with the 3A.  I have the 2 Bentley wiring diagram and  there is no horn relay 
> and I have not found one on my 3A.  
> To relay or not to relay. That is the question.
> 
> David  Lylis
> 69 TR6 CC26160L
> 60 TR3A TS74461LO
> 
> 
> 
> **************Gas prices getting you down? Search AOL Autos for 
> fuel-efficient used cars.      (http://autos.aol.com/used?ncid=aolaut00050000000007)
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
> 
> 
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
> 
> You are subscribed as standardtriumph at btinternet.com
> 
> http://www.team.net/archive