[TR] How Many Gearheads Does it Take to Put in a Tranny?

Bill & AnnaBelle anabil007 at comcast.net
Tue Jan 15 12:34:12 MST 2008


There  is a clever device  called a transmission  jack  ... it  rolls 
under the car, you put the transmission on the transmission jack, 
move it as  you desire, forward, backward, up, down, makes the whole 
experience  ... gratifying  ... ;-)


>My experience is that it takes two gearheads to take out a transmission and
>two or three to put  one back in depending of if it's overdrive or non
>overdrive.  With the overdrive Transmission I like to have two gearheads
>under the car supporting the transmission and lining it up and one in the
>car maneuvering the transmission and turning the tail flange to line up the
>main shaft with the clutch plate.
>	In my opinion its not worth the chance of messing up the main shaft
>or something else by trying to remove/replace the transmission without
>adequate help.
>
>
>Bob Rochlin
>
>'72 TR6


-- 
Bill  Pugh
1957 TR3 TS16765L
aka
Casper

AnnaBelle Pugh
1970 TR6 CC59179L
aka
Rosey
Wallace, CA


More information about the Triumphs mailing list