[TR] exhaust systems

[thenicholls at verizon.net]

I have the Bell stock stainless steel system on my 1972 Triumph TR6. 
The shop that installed it said it was the best fitting exhaust they 
have ever mounted.

Several years later, it looks and sound like the day it was installed. 
Did not want to lose that stock sound.

Craig H. Nicholls


On Wed, Aug 20, 2008 at  4:09 PM, Chip19474 at aol.com wrote:

> Gary and List,
>  I've been thinking of a custom exhaust setup for my TR6 recently as 
> well.  I have a stock muffler and always have wondered what it would 
> look  like and if anyone has been successful with welding a pair of 
> twin pipes to  the rear of the muffler on the passenger side (in a 
> mirror image to what exits  from the muffler to the rear on the 
> driver's side)....creating a  symmetrical 4 pipe setup??
>  But, Gary, good luck with your project!
>  Chip Krout
> Delaware Valley Triumphs, Ltd.
> Skippack, PA
> 1976 TR6  CF57822U
>   In a message dated 8/20/2008 10:17:14 A.M. Eastern Daylight Time, 
> nafzigerg at yahoo.com writes:
>
> Actually  I'd like to make up my own  system.
>
>
>
>
> **************It's only a deal if it's where you want to go. Find your 
> travel deal here. 
> (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as thenicholls at verizon.net
>
> http://www.team.net/archive