[TR] TR4 replacement parts

[Brian Induni]

I purchased the rubber seal and furflex from Moss (thru a wholesaler though,
never pay THOSE prices!) and they fit well. Some words of caution - if the
channels that hold the rubber seal are gone or almost gone, go with the one
pieces rubber/furflex, don't try to reweld the channel on. My car had next
to no rust so I was lucky the channels were in great shape.

Also, be prepared for LOTS of door fitting and mashing of the new rubber
seal! I let mine set with the doors latched at one click for a month before
I could actually get the doors to close all the way. Now, a year later,
everything fits nice and snug. Same with the trunk rubber. Oh, and be really
stocked with band-aids and beer as fitting the rubber in the channel is an
extreme test of patience and pain level...

If I had to do it again, I'd probably go with the TRF parts as I think they
have better quality. Watch for the sales and you could do well...

Brian
67 TR4a
Is it summer yet?? :-)
------------------------------

Message: 13
Date: Thu, 10 Apr 2008 06:36:40 -0500
From: Bob Labuz <yellowtr at adelphia.net>
Subject: Re: [TR] TR4 replacement parts
To: triumphs at autox.team.net
Message-ID: <200804100736.40766.yellowtr at adelphia.net>
Content-Type: text/plain; charset="iso-8859-1"

On Wednesday 09 April 2008 10:14 pm, goh56agan at comcast.net wrote:
> List,
>  Can anyone answer some questions about replacement parts for a 62TR4?  I
> wasn't sure if these were appropriate for the List. I'm looking to replace
> the door seals.  Moss sells two pieces, a furflex and a rubber seal.  TRF
> also sells two pieces but seems to recommend a single combined strip.  The
> Moss parts are also more expensive.  Is there any difference in quality?
> Any experiences with these? Also any suggestions about best place to get
> the 1/2" belt conversion (again Moss's price is higher).
> Any help would be appreciated. I'm just getting started and I have a lot
of
> questions. Contacting me off List is fine.
> Gary O
Gary,

I used the 2 piece setup (furflex on the inside and the rubber seal on the 
outside).

The furflex fits real snug on the sill weld and up to the top of the 
windshield.

The rubber fits in that groove  or channel.

THe fit was perfect and does its job. Real easy to install. The furflex
looks 
real sharp.

Both parts from TRF.

Bob


------------------------------

_______________________________________________

Triumphs mailing list
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


End of Triumphs Digest, Vol 2, Issue 181
****************************************