[Tigers] toureau stud

[Jim]

I just drilled an appropriate hole  and installed 10/32 ‘Riv nuts’ and screwed the studs in… all done from above … easy-peasy
Jim
B382000446 LRXFE

Sent from my ShoePhone


> On Oct 1, 2023, at 3:51 PM, Clyde Mclaughlin <clydemclaughlin618 at gmail.com> wrote:
> 
> 
> Get a stud with #10 machine thread,  drill the hole to appropriate size, put a small punch through the hole and tap it, it will put a dent in the panel in the trunk underneath, then use a rota broach bit and make a 1/2" hole in that under panel, now you can install a nut and washer on the the treaded stud, maybe use some blue locktite or a nylock nut.  problem solved for good.
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/jim@island.net
> 
>