[Tigers] toureau stud

[Clyde Mclaughlin]

Get a stud with #10 machine thread,  drill the hole to appropriate size,
put a small punch through the hole and tap it, it will put a dent in the
panel in the trunk underneath, then use a rota broach bit and make a 1/2"
hole in that under panel, now you can install a nut and washer on the the
treaded stud, maybe use some blue locktite or a nylock nut.  problem solved
for good.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20231001/23c1ae63/attachment.htm>