[Tigers] Panhard Rod Question
Jim D'Amelio
jimdamelio at verizon.net
Thu Dec 1 09:43:54 MST 2022
Theo,Thanks for the response. I understand how the difference was with the MKII and it can't be changed without the MKII parts and some modifications to make it more level. Just needed to know the orientation of the bar. Jim DSent from my Galaxy
-------- Original message --------From: Theo Smit <tsmit at shaw.ca> Date: 12/1/22 11:19 AM (GMT-05:00) To: Jim D'Amelio <jimdamelio at verizon.net> Cc: tigers at autox.team.net Subject: Re: [Tigers] Panhard Rod Question The “wrong from the factory” part is that the frame attachment and the axle attachment should have been done on the opposite sides, which you cannot fix just by flipping the bar around. A second and more important issue is that the frame mounting arm should have been extended to position the panhard bar horizontally at normal ride height. But that requires more structure back there to support the lateral loads or things will just tear apart over time (as they already do). Cheers,TheoOn Dec 1, 2022, at 9:12 AM, Jim D'Amelio via Tigers <tigers at autox.team.net> wrote:It's been so many years since I removed it, so I don't remember. Does the adjuster end of the rod go into the frame bracket or the diff bracket? Does it really matter which end goes where? I've read all the different view on the rod being in the wrong position from the factory, but can't find a picture of a stock bar mounted.Thanks Jim DSent from my Galaxy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20221201/3a9a26ed/attachment.htm>
More information about the Tigers
mailing list