[Tigers] LAT Lug Nut Size

[jimdamelio]

Thanks Joe.  That will help a lot.Jim DSent from my Galaxy
-------- Original message --------From: Joe Brown <jbbrown1980 at gmail.com> Date: 9/10/21  3:37 PM  (GMT-05:00) To: Larry Mayfield <drmayf at mayfco.com> Cc: jimdamelio <jimdamelio at verizon.net>, Tiger List Serve <tigers at autox.team.net> Subject: Re: [Tigers] LAT Lug Nut Size Hi,The lug nuts in Larry's photo seem to match up with what I have.  I bought my car from the original owner and it had the original LAT70 wheels.  I upgraded my wheels but I kept the old ones along with the lug nuts.  So I pulled one out and made some measurements that I rounded off to the nearest 1/100".Have Fun,Joe BrownOn Fri, Sep 10, 2021 at 1:53 PM Larry Mayfield via Tigers <tigers at autox.team.net> wrote:I have a set of lat wheel with lugs I purchased in or about 1968 from Mr. R.G. Wheatley  in SoCal. The lug nuts from that is certainly different that any of these. These look like they are aftermarket non LAT lug nuts.  Attached is a photo of what I believe to be very original since I bought them back in the day from a place that was selling Sunbeam cars etc. The shank and the very top or end is the same diameter with the hex machined area. A large non detachable washer is on the lug.  LarryAka mayfAka drmayfTWFS 210779 mph Bonneville exit speed, But less than top speed, lol (only running at 6200 rpm, redline was at 7000) but ran out out of course, lol…Estimated top speed would have been around 238 mph……way too fast for an old geezer like myself…driving a 90 inch wheel base car… From: Tigers <tigers-bounces at autox.team.net> On Behalf Of jimdamelio via TigersSent: Thursday, September 9, 2021 11:50 AMTo: tigers at Autox.Team.NetSubject: [Tigers] LAT Lug Nut Size Does anyone know the dimensions and design for the correct LAT lug nuts.  I know they are 7/16 - 20, but I need to know the length of the hex head and total length. I have several with different head designs and length that came with my wheels.  I would like to know what is correct.  I know the washer is 1-1/16 x 11/16 x 1/8 Jim D  Sent from my Galaxy _______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210910/22a080ad/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Lug Nut.jpg
Type: image/jpeg
Size: 26001 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20210910/22a080ad/attachment.jpg>