[Tigers] LAT Lug Nut Size

[jimdamelio]

Thanks for responding Larry.  I wasn't sure if any of mine were correct.  Looking at what's available now, it seems the style you have are more readily available.  Now to find them with the attached washer.Jim DSent from my Galaxy
-------- Original message --------From: Larry Mayfield <drmayf at mayfco.com> Date: 9/10/21  2:51 PM  (GMT-05:00) To: 'jimdamelio' <jimdamelio at verizon.net>, 'Tiger List Serve' <tigers at autox.team.net> Subject: RE: [Tigers] LAT Lug Nut Size I have a set of lat wheel with lugs I purchased in or about 1968 from Mr. R.G. Wheatley  in SoCal. The lug nuts from that is certainly different that any of these. These look like they are aftermarket non LAT lug nuts.  Attached is a photo of what I believe to be very original since I bought them back in the day from a place that was selling Sunbeam cars etc. The shank and the very top or end is the same diameter with the hex machined area. A large non detachable washer is on the lug.  LarryAka mayfAka drmayfTWFS 210.779 mph Bonneville exit speed, But less than top speed, lol (only running at 6200 rpm, redline was at 7000) but ran out out of course, lol…Estimated top speed would have been around 238 mph……way too fast for an old geezer like myself…driving a 90 inch wheel base car… From: Tigers <tigers-bounces at autox.team.net> On Behalf Of jimdamelio via TigersSent: Thursday, September 9, 2021 11:50 AMTo: tigers at Autox.Team.NetSubject: [Tigers] LAT Lug Nut Size Does anyone know the dimensions and design for the correct LAT lug nuts.  I know they are 7/16 - 20, but I need to know the length of the hex head and total length. I have several with different head designs and length that came with my wheels.  I would like to know what is correct.  I know the washer is 1-1/16 x 11/16 x 1/8 Jim D  Sent from my Galaxy 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20210910/9d604399/attachment.htm>