[Tigers] More Common Part Questions...

[GARY WINBLAD]

Hi Mayf,
The Alpine a-arms are the same except they have a "stop" for the steering angle, a tab sticking up that could be cut off..
as far as I know.  The spindles are the same (they have a little (trianglular) projection at the bottom for the aforementioned Alpine
a-arm stop tab, not used on the TIger which relies on the rack travel stop.
Ball joints the same, though I think the TIger ones may be up-spec'd by some suppliers?
Hubs same I think.  Tie rod ends are DIFFERENT.
Gary


>     On 10/04/2021 1:48 PM Larry Mayfield via Tigers <tigers at autox.team.net> wrote:
> 
> 
> 
>     Are the front lower A arms the same on Alpine S5 as Tiger?  Front upright spindles? Upper and lower ball joints?  Front hubs? Tie rod ends? I know steering arms are different,  but what else is common? Generally.
> 
> 
>     Anything else?
> 
> 
>     mayf
> 
>     _______________________________________________
> 
>     tigers at autox.team.net
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
> 
>     Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20211004/423f89ab/attachment.htm>