<!doctype html>
<html>
<head>
<meta charset="UTF-8">
</head>
<body>
<div>
Hi Mayf,
</div>
<div class="default-style">
The Alpine a-arms are the same except they have a "stop" for the steering angle, a tab sticking up that could be cut off..
</div>
<div class="default-style">
as far as I know. The spindles are the same (they have a little (trianglular) projection at the bottom for the aforementioned Alpine
</div>
<div class="default-style">
a-arm stop tab, not used on the TIger which relies on the rack travel stop.
</div>
<div class="default-style">
Ball joints the same, though I think the TIger ones may be up-spec'd by some suppliers?
</div>
<div class="default-style">
Hubs same I think. Tie rod ends are DIFFERENT.
</div>
<div class="default-style">
Gary
</div>
<div class="default-style">
<br>
</div>
<blockquote type="cite">
<div>
On 10/04/2021 1:48 PM Larry Mayfield via Tigers <tigers@autox.team.net> wrote:
</div>
<div>
<br>
</div>
<div>
<br>
</div>
<div class="WordSection1">
<p class="MsoNormal">Are the front lower A arms the same on Alpine S5 as Tiger? Front upright spindles? Upper and lower ball joints? Front hubs? Tie rod ends? I know steering arms are different, but what else is common? Generally.</p>
<p class="MsoNormal"><br></p>
<p class="MsoNormal">Anything else?</p>
<p class="MsoNormal"><br></p>
<p class="MsoNormal">mayf</p>
</div>_______________________________________________
<br>
<br>tigers@autox.team.net
<br>
<br>Donate: http://www.team.net/donate.html
<br>Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
<br>
<br>Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
<br>
<br>
<br>
</blockquote>
</body>
</html>