[Tigers] tiger headers

[Owain Lloyd]

I found the CAT club headers from a few years ago (2012?) a better fit and
a smoother underside than my really old LAT style headers were.   I think
pretty much flush with the oil pan.  I can photograph it from the ground
tomorrow if you're interested.

On Thu, Dec 3, 2020 at 11:04 PM clyde mclaughlin via Tigers <
tigers at autox.team.net> wrote:

> Im curious if the latest headers from any suppliers have way better fit
> particularly with the cyl #3 and cyl #7 tubes. I have had two different
> sets of headers and both set have these tubes lower than they need to be
> and always drag if clearance is less than optimal.  They are lower than the
> center of the front suspension cross member. I don't know the supplier of
> the sets I have had. Would be interested in comments on header brands and
> fit relative to ground clearance, before I go back to manifolds Thanks,
> Clyde
>
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20201203/deecdce6/attachment.htm>