[Tigers] tiger headers

[jvparlanti at gmail.com]

Clyde,

 

You know that I’m in the same situation and am looking for alternatives. I’ve been fighting the low ground clearance issue with my headers for years. Mine came from SS.

 

Thanks,

 

JVP

 




         16048 Copen Meadow Dr
        North Potomac, MD 20878
             Cell - 410-599-5475

      Email -  <mailto:jvparlanti at gmail.com> jvparlanti at gmail.com

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of clyde mclaughlin via Tigers
Sent: Thursday, December 3, 2020 5:03 PM
To: tigers at autox.team.net
Subject: [Tigers] tiger headers

 

Im curious if the latest headers from any suppliers have way better fit particularly with the cyl #3 and cyl #7 tubes. I have had two different sets of headers and both set have these tubes lower than they need to be and always drag if clearance is less than optimal.  They are lower than the center of the front suspension cross member. I don't know the supplier of the sets I have had. Would be interested in comments on header brands and fit relative to ground clearance, before I go back to manifolds Thanks, Clyde 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20201203/f764f5f5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3211 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20201203/f764f5f5/attachment.jpg>