[Tigers] Bumper Questions
Gary
maliburevue at yahoo.com
Fri May 3 16:44:45 MDT 2019
For #2: IIRC I used a windshield wiper grommet for the rear valance, fit perfectly.
Gary
From: Joe Brown via Tigers <tigers at autox.team.net>
To: Tigers Den <Tigers at autox.team.net>
Sent: Friday, May 3, 2019 4:24 PM
Subject: [Tigers] Bumper Questions
Hi,
1. For the front bumper brackets how can I tell which one goes on the driver's side and which one on the passenger side? Do I mount the brackets so that the slotted mounting holes are higher (which moves the bumper lower) or do I mount the brackets so the slotted mounting holes are lower (moving the bumper higher)?
2. From my research it sounds like the rear bumper brackets are supposed to have a rubber grommet and a spacer for where the mounting bolt goes through the rear valance. Does anybody have the dimensions for these pieces or a photo or drawing?
Thanks,Joe Brown_______________________________________________
tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/maliburevue@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190503/dae0fbd4/attachment.html>
More information about the Tigers
mailing list