[Tigers] Bumper Questions

[Ron Fraser]

Joe

Here is a picture for #2.

It would be interesting if the drawings for these 2 parts is available at the Rootes Archive to see if my dimensions are correct or close.

 

The sealing washer gets squeezed to fill the large hole in the body; seals out dust and exhaust fumes so a larger or thicker washer maybe desirable.

 



 

>From the Alpine Parts List #6600992

2201300                Distance piece   Rear bumper to frame

2201729                Sealing washer

 

Distance piece dimensions

OD = .870”

ID = .535”

Length = .625”

 

Sealing Washer dimensions

OD = 1.33”

ID = .9”

Thickness = .255”

 

Ron Fraser

 

 

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Joe Brown via Tigers
Sent: Friday, May 03, 2019 6:24 PM
To: Tigers Den <Tigers at autox.team.net>
Subject: [Tigers] Bumper Questions

 

Hi,

 

1. For the front bumper brackets how can I tell which one goes on the driver's side and which one on the passenger side?  Do I mount the brackets so that the slotted mounting holes are higher (which moves the bumper lower) or do I mount the brackets so the slotted mounting holes are lower (moving the bumper higher)?

 

2. From my research it sounds like the rear bumper brackets are supposed to have a rubber grommet and a spacer for where the mounting bolt goes through the rear valance.  Does anybody have the dimensions for these pieces or a photo or drawing?

 

Thanks,

Joe Brown

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20190505/6d6cee16/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 9667 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20190505/6d6cee16/attachment.jpg>