[Tigers] Valve Cover Sticker Removal?

[Will Seay]

>
> Randy,
>

​Just a word of caution, to get clearance to fit the valve covers under the
firewall Tiger valve covers are of a lower profile than standard Ford valve
covers​.  Make sure that your shiny new replacement valve covers will fit.
You might find that rechroming your original valve covers is the easier
option.  As to removing the sticker, I don't have specific experience with
removing the sticker but most adhesives can be removed with either gasoline
or lacquer thinner.  Try soaking the valve cover in both.  The sticker is
metallic so you can't hurt it.

Will - 382001570

> ​
>


On Thu, Jun 21, 2018 at 3:32 AM, Randall Antosiak via Tigers <
tigers at autox.team.net> wrote:

> Has anyone tried to remove the SUNBEAM LTD sticker on the chrome valve
> cover without damaging the sticker?  I would like to replace my corroded
> valve covers with shiny new chrome covers, but I would prefer to reuse the
> existing SUNBEAM sticker if that is possible.
>
> Thanks,
> Randy Antosiak
>
> _______________________________________________
> ​
>
>

>
>
tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/tigers@
> embarqmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180621/da00b8c6/attachment.html>