[Tigers] Valve Cover Sticker Removal?

[Gary M. Gere]

You might try 3M adhesive remover ((https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Adhesive-Remover/?N=5002385+3293194120) - it is available at any automotive paint supply store. Will not damage painted surfaces. I have used it many times and it will remove almost any adhesive backed item. Much better than acetone, lacquer thinner or other solvents. You may have to soak the sticker from the outside and slowly peel the sticker off but it should work.

-Gary

> On Jun 21, 2018, at 3:24 PM, Gary Winblad via Tigers <tigers at autox.team.net> wrote:
> 
> Hi Randy,
> Back in 1991 I tried.  No way, they are stuck really good  :(
> I got it off in one piece but it had reverse dents, etc.
> Rick's new sticker with numbers punched in with an old typewriter actually looks
> great.  My covers were in very good shape, I reused them after a slight polish.
> Gary
> 
>> On 6/21/2018 12:32 AM, Randall Antosiak via Tigers wrote:
>> Has anyone tried to remove the SUNBEAM LTD sticker on the chrome valve cover without damaging the sticker?  I would like to replace my corroded valve covers with shiny new chrome covers, but I would prefer to reuse the existing SUNBEAM sticker if that is possible.
>> 
>> Thanks,
>> Randy Antosiak
>> 
>> 
>> _______________________________________________
>> 
>> tigers at autox.team.net
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> 
>> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>> 
>> 
> 
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> 
> Unsubscribe: http://autox.team.net/mailman/options/tigers/ggere@comcast.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180622/36c768ff/attachment.html>