[Tigers] F4-B factory instructions
Ron Fraser
rfraser at bluefrog.com
Thu Jul 19 21:27:54 MDT 2018
Jim
Edelbrock had a throttle bracket mount that I used on my stock 2 bbl carb and it placed the throttle cable in near perfect position.
I have no idea if it would work for you but it may.
Ron Fraser
From: James Lindner <jliny5 at cox.net>
Sent: Thursday, July 19, 2018 7:58 PM
To: Ron Fraser <rfraser at bluefrog.com>
Cc: Allan Ballard <aballard at ix.netcom.com>; snakebit289 <snakebit289 at yahoo.com>; tigers at Autox.Team.Net
Subject: Re: [Tigers] F4-B factory instructions
Ron is spot on regarding the throttle cable angle. I have tried mounting the factory bracket every which way without a better solution. Could I go with a non-stock bracket and set up...sure, but I have tried to keep everything pretty much stock. I do carry an extra capable in my tool bag. 😃
Jim
Sent from my iPad
On Jul 19, 2018, at 7:38 PM, Ron Fraser via Tigers <tigers at autox.team.net <mailto:tigers at autox.team.net> > wrote:
Allan
It looks like the correct routing to me but I’m not the expert here. I’m sure it depends on the exact intake manifold you have and the location of the needed ports for coolant and vacuum on that intake manifold.
I do not like the angle of the throttle cable. If that is a stock throttle cable – it will break at some time and it’s always the wrong time; there is too much angle and bind in the cable as shown. You would need a multi-wire cable for the throttle with more flexibility for that combination of parts as shown. A better solution here is to reduce the angle and bind to minimum no matter what style cable you use.
Ron Fraser
From: Tigers <tigers-bounces at autox.team.net <mailto:tigers-bounces at autox.team.net> > On Behalf Of Allan Ballard via Tigers
Sent: Thursday, July 19, 2018 5:41 PM
To: snakebit289 <snakebit289 at yahoo.com <mailto:snakebit289 at yahoo.com> >
Cc: Tiger List List <tigers at autox.team.net <mailto:tigers at autox.team.net> >
Subject: Re: [Tigers] F4-B factory instructions
Interesting - thanks.
Would the picture represent the “correct” routing of hoses?
Allan Ballard
Mk1a Tiger
Series 1 Alpine (2.8)
Sent from my iPhone
On Jul 19, 2018, at 1:55 PM, snakebit289 via Tigers <tigers at autox.team.net <mailto:tigers at autox.team.net> > wrote:
Here is the digital set of instructions for the Edelbrock F4B intake manifold for Tigers.
Rande Bellman
<F4b_Install.jpg>
_______________________________________________
tigers at autox.team.net <mailto:tigers at autox.team.net>
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers
Unsubscribe: http://autox.team.net/mailman/options/tigers/jliny5@cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180720/4940faa3/attachment.html>
More information about the Tigers
mailing list