[Tigers] Electrical short during start attempt
Gary Winblad
garywinblad at comcast.net
Fri Jul 20 15:53:47 MDT 2018
Check the big ground strap down by the slave cylinder bracket.
Gary
On 7/20/2018 1:57 PM, Graham Harlowe via Tigers wrote:
> After gassing up this morning I went to restart the car. When I turned the
> key, I got VERY slow and reluctant turnover (not enough to catch) and heavy
> draw on the voltmeter. Turned the key again for another attempt I got the
> same thing and noticed a wisp of smoke from under the hood. When I popped
> the hood, I noticed a burned/melted section of the wire harness in the
> vicinity of the alternator. Dang. Once home (tow truck), it appears a
> couple of ground wires had borne the burden of a short. One of the scorched
> ground wires runs down the loom along with the temp sending unit wire and
> (on my car) attaches to a mount for the coil on the intake manifold. The
> other fried ground wire attaches to the base of the ballast resistor. I
> have a one-wire GM alternator, not the stock generator.
>
> I have the a wiring schematic, but a diagram of the harness and what these
> two wires (or perhaps one wire with two connections?) are supposed to serve
> as the ground for would be helpful. I could splice in some new black wires,
> but that seems pointless without understanding what caused the short in the
> first place. Any ideas where/how to look?
>
> Thanks much,
>
> Graham Harlowe
> B382001466
>
>
>
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
>
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>
>
More information about the Tigers
mailing list