[Tigers] Electrical Question
Gary Winblad
garywinblad at comcast.net
Sun Aug 26 20:34:48 MDT 2018
Ok, I see the problem...
There are 3 wires to the wiper motor and a ground.
All of the Tiger wiring diagrams show 2 wires and a ground!! Humm...
LUCAS !?
So.. I don't know..
I figured it out years ago.. I remember that much. It was the
discovery that the switch connects
a ground and not a 12v hot that let me figure it out, see my explanation
below
Gary
On 8/26/2018 6:35 PM, Gary wrote:
> I am not sure which wire is which but the
> way it works:
> 12v goes to the motor
> A wire from the other side of the motor goes
> back to the switch
> When the switch is closed, it connects the
> low side (non 12v side) to ground
> The motor runs
> When you turn off the switch, the motor
> keeps running because there is another
> switch inside the motor that will keep the
> ground connection going until the wipers
> get to the parked position
>
> Gary
>
> Sent from my iPhone
>
> On Aug 23, 2018, at 7:02 PM, Ron Fraser via Tigers
> <tigers at autox.team.net <mailto:tigers at autox.team.net>> wrote:
>
>> Joe
>>
>> 1 – the switch
>>
>> Position 1 – Red light green wire
>>
>> Position 4 – brown light green wire
>>
>> Position 6 – ground wire
>>
>> The green wire feeds 12v to wiper motor from fuse
>>
>> 2 - the motor – sorry I’m not the electrical guy but I think the 2
>> speeds are done by internal connections in the motor
>>
>> Ron Fraser
>>
>> *From:* Tigers <tigers-bounces at autox.team.net
>> <mailto:tigers-bounces at autox.team.net>> *On Behalf Of *Joe Brown via
>> Tigers
>> *Sent:* Thursday, August 23, 2018 3:51 PM
>> *To:* Tigers Den <Tigers at autox.team.net <mailto:Tigers at autox.team.net>>
>> *Subject:* [Tigers] Electrical Question
>>
>> Hi,
>>
>> I'm trying to test everything before I install things under the
>> dash. I'm now trying to test the wiper motor. There are four wires
>> coming out- red, green, brown and a ground wire on the case. If I
>> put 12V between the red and green the motor works. But nothing
>> happens if I put 12V on any other combination of wires. Shouldn't I
>> be able to get a different speed using another wire?
>>
>> Secondary question: is there a diagram that shows which wire goes to
>> which post on the switch? I have the wiring diagram but it doesn't
>> show how the wires connect to the switch.
>>
>> Thanks,
>>
>> Joe Brown
>>
>> _______________________________________________
>>
>> tigers at autox.team.net <mailto:tigers at autox.team.net>
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>>
>>
More information about the Tigers
mailing list