[Tigers] Electrical Question

[Ron Fraser]

Joe

 

1 – the switch

 

Position 1 – Red light green wire

Position 4 – brown light green wire

Position 6 – ground wire

 

The green wire feeds 12v to wiper motor from fuse

 

2 -  the motor – sorry I’m not the electrical guy but I think the 2 speeds are done by internal connections in the motor

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Joe Brown via Tigers
Sent: Thursday, August 23, 2018 3:51 PM
To: Tigers Den <Tigers at autox.team.net>
Subject: [Tigers] Electrical Question

 

Hi,

 

I'm trying to test everything before I install things under the dash.  I'm now trying to test the wiper motor.  There are four wires coming out- red, green, brown and a ground wire on the case.  If I put 12V between the red and green the motor works.  But nothing happens if I put 12V on any other combination of wires.  Shouldn't I be able to get a different speed using another wire?

 

Secondary question: is there a diagram that shows which wire goes to which post on the switch?  I have the wiring diagram but it doesn't show how the wires connect to the switch.

 

Thanks,

Joe Brown

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180823/38e171a1/attachment.html>