[Tigers] Brake Line Question

[Ron Fraser]

Joe

                You have to look at the Alpine Parts List for this.

 

Hose uses a shakeproof washer and nut at those tabs

 

Ron Fraser

 

From: Tigers <tigers-bounces at autox.team.net> On Behalf Of Joe Brown via Tigers
Sent: Wednesday, August 01, 2018 11:19 PM
To: Tigers Den <Tigers at autox.team.net>
Subject: [Tigers] Brake Line Question

 

I have a question about how the hard brake line running to the rear axle attaches to the flex line.  I have two clips that slip over tabs on the front crossmember to join the flex  and hard lines on the front end (see attached photo) but I can't find something similar for the rear end.  There is a tab with a hole welded to the body just in front of the rear axle and another tab on the axle itself and I guess I can use them without a clip.  Should there be clips for the back like there are on the front?  

 

The parts manual doesn't show these clips (that I can find).  The repair manual shows them with a note that says "may not be used in all locations" or something like that.

 

 

Thanks,

Joe Brown

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180802/be9a1599/attachment.html>