[Tigers] Brake Line Question

[Joe Brown]

It turns out my PDF copy of the Alpine parts list was missing a LOT of
pages.  I found a good copy of Section Q on the Tigers United web site, so
I am good to go now.

Thanks,
Joe Brown

On Thu, Aug 2, 2018 at 6:04 AM, Ron Fraser <rfraser at bluefrog.com> wrote:

> Joe
>
>                 You have to look at the Alpine Parts List for this.
>
>
>
> Hose uses a shakeproof washer and nut at those tabs
>
>
>
> Ron Fraser
>
>
>
> *From:* Tigers <tigers-bounces at autox.team.net> *On Behalf Of *Joe Brown
> via Tigers
> *Sent:* Wednesday, August 01, 2018 11:19 PM
> *To:* Tigers Den <Tigers at autox.team.net>
> *Subject:* [Tigers] Brake Line Question
>
>
>
> I have a question about how the hard brake line running to the rear axle
> attaches to the flex line.  I have two clips that slip over tabs on the
> front crossmember to join the flex  and hard lines on the front end (see
> attached photo) but I can't find something similar for the rear end.  There
> is a tab with a hole welded to the body just in front of the rear axle and
> another tab on the axle itself and I guess I can use them without a clip.
> Should there be clips for the back like there are on the front?
>
>
>
> The parts manual doesn't show these clips (that I can find).  The repair
> manual shows them with a note that says "may not be used in all locations"
> or something like that.
>
>
>
>
>
> Thanks,
>
> Joe Brown
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180802/307041af/attachment.html>